|
|
|
|
 |
Corner Cube Retroreflector (CCR) has three mutually perpendicular surfaces and a hypotenuse surface. The exterior CCR is equal to an optical glass cube which is cut down as its angle. Any ray entering the hypotenuse will be reflected and emerge from the entrance/exit face parallel to itself, but in the opposite direction of propagation if the three mutually perpendicular surfaces are exactly 90 degree. For its special performance, it is not only used in military affairs, aviation and spaceflight, but also used in the distance measurement, optical signal process and laser interferometer. |
|
| |
 |
| |
| Material: |
BK7A |
| Surface Flatness: |
¦Ë/10 @ 633nm |
| Wavefront Distortion: |
¦Ë/4 @ 633nm |
| Surface Quality: |
60/40 |
| Dimension Tolerance: |
+0.00/-0.20mm |
| Beam Deviation: |
See table |
| Clear Aperture: |
90% of central dimension |
| Coating: |
Uncoated or coated Ag & Cu with painting |
| Bevel on right angle: |
<0.2mmx45¡ã |
| Other bevel: |
Protected |
|
 |
|
| |
Product Number |
D |
H |
Beam Deviation |
TCCR-25.4B-5sec |
25.4 |
18.8 |
180¡ã¡À5 arcsec |
TCCR-25.4B-10sec |
25.4 |
18.8 |
180¡ã¡À10 arcsec |
TCCR-38.0B-5sec |
38.0 |
28.5 |
180¡ã¡À5 arcsec |
TCCR-38.0B-10sec |
38.0 |
28.5 |
180¡ã¡À10 arcsec |
TCCR-64.0B-5sec |
64.0 |
48.0 |
180¡ã¡À5 arcsec |
TCCR-64.0B-10sec |
64.0 |
48.0 |
180¡ã¡À10 arcsec |
|
| |
¡¤All dimensions are in mm unless otherwise specified.
¡¤Other sizes and materials are available upon requests. |
| |
 |
¦Á=4.95¦Ä£¨¦Ä12£¬¦Ä23,¦Ä13)
¦Á:Beam deviation
¦Ä:Angle error of three mutually perpendicular surfaces
|
|
| |
|
|
|
